Guest experience

Airport meet and greet: the name sign, the wait, the hand-over and the first message

A hotel airport meet and greet works when the sign, wait point, handover and messages are fixed in writing. Learn how to build this process from one reservation record.

  • 10 min read
  • AI Otel Editorial

AI draft · awaiting editorial review

Contents

Key takeaways

  1. A name sign is a working document: the guest's name as booked, spelled the way they will recognize it, plus a second line naming the hotel that is meeting them.
  2. The wait point must be written down and sent to the guest, because "at the airport" is not a place anyone can stand.
  3. The hand-over ends when the driver has the bags and the guest is seated, and someone records that it happened.
  4. Landing time is not arrival time: passport control and baggage are part of the wait, and the hotel decides in advance when its wait clock starts.
  5. A no-show rule decided in the arrivals hall is a negotiation; the same rule written into the transfer terms and repeated in the arrival message is a procedure.

A hotel airport meet and greet is an arrangement to have a named person wait for a guest at the airport and hand them to a driver. It works when four things are fixed in writing: what the sign says, where the person stands, who takes the bags, and the message the guest receives before landing.

The flight lands early. The guest walks out of arrivals, scans the row of signs, finds no name they recognize, and calls the number they saved. That call is the meet and greet, whether or not anyone planned one. A guest who cannot find the driver forms an opinion of the hotel before the car door opens. After reading this, you will be able to build the meet and greet from one record: the sign, the wait point, the hand-over and the messages all printed from the same four facts.

What should the hotel hold before the flight lands?

Four things: the flight, the name as the guest writes it, a number that works when the guest lands, and what they are carrying. Everything else in the meet and greet is printed from these.

The flight number and date are the only details that let the hotel check a delay without calling the guest. The arrival airport and terminal decide where the driver may stand, and the vehicle size follows from the passenger and bag count. If you collect arrival details at booking, as covered in what to ask guests before arrival, most of this is already on file.

Take the name as it appears on the booking, then ask the guest how they write it in Latin letters. The sign is read at a glance by someone who has been traveling for hours. Record a mobile number with its country code and the messaging channel the guest confirms, because a number that only works at home is not a contact.

Note the number of travelers, the checked bags and anything oversized, such as a golf bag, a stroller or a wheelchair. These decide the vehicle and how long the hand-over takes. Ask whether the guest knows the airport: a first-time visitor needs a landmark and a photograph of the meeting point; a repeat guest needs a time and a name.

Keep all of it in one field of the reservation rather than in a message thread on three phones. The sign, the driver's job sheet and the guest message are all printed from that one record. Set the hotel's own confirmation window and write it down, for example a message the evening before arrival that asks the guest to confirm the flight and the number.

ChecklistDetails to hold before the flight

  • Flight number and date
  • Arrival airport and terminal
  • Guest name exactly as it will appear on the sign
  • Mobile number with country code and the confirmed messaging channel
  • Number of travelers and checked bags, plus oversized items
  • Whether the guest knows the airport
  • The hotel's own confirmation window and who sends it

What should be on an airport pickup sign?

The guest's name, written the way the guest will recognize it, in type large enough to read from several meters, with a second line that says which hotel is meeting them.

Use the name from the booking rather than a title or a company name. A board reading "Mr A. Yilmaz" is harder to spot than "Ahmet Yılmaz". Add a second line with the hotel name and, where the terminal has more than one exit, the meeting point, so the guest can confirm they are looking at the right person.

Print one name per board in dark type on a light background. A board covered in logos and several names is read as advertising and skipped. Check the spelling and the diacritics against the booking, and tell the guest in the arrival message exactly what the sign will say when their name uses characters a printer may drop.

On the signLeft off the sign
Guest name as bookedBooking reference and internal transfer codes
Hotel name and meeting pointGuest's phone number and room number
One name per boardSeveral names and logos on one board
Dark type on a light boardDecorative fonts and animation

Keep the guest's phone number off the front of the sign; the staff number belongs on the back, for the person holding it. If the hotel uses a tablet instead of a printed board, brightness and a large font matter more than animation. A screen held at chest height is harder to read than a board held up. The sign comes from the same record as the transfer, so a change of name or flight changes both at once.

Where should the driver wait, and when is the flight checked?

At one named point inside the terminal that the airport allows the hotel to use, and the flight is checked twice: before the driver leaves the hotel and again when the aircraft lands.

"At the airport" is not an address. Name the hall, the exit, the column or the café, and use the same words in the guest message, the driver's job sheet and the sign. Airports differ in who may wait inside and where; the hotel confirms with the airport operator what its staff may do and writes the answer into the job sheet.

The first check happens before the driver leaves: the flight number gives the actual landing time, and a delay moves the departure, not the guest's expectation. The second check happens when the aircraft lands, because a delay can appear after the driver has already left. If the guest lands early, the driver may not be there yet; the arrival message should say what the guest does in that case.

Watch outLanding time is not arrival time

A driver who leaves on the scheduled landing time and a guest who clears passport control later meet in an empty hall, and the guest reads that as a hotel that did not come. Decide in advance whether the hotel's clock starts at the wheels or at the arrivals door.

How does the hand-over to the driver work?

As four steps in order: confirm the name, take the bags, walk the guest to the vehicle, and confirm the guest is seated before the car moves.

Where the person holding the sign and the driver are different people, the guest is walked to the vehicle, never pointed at it. Count the bags out loud at the vehicle and say the number; the count is what stops a bag being left in the hall. Tell the guest the vehicle type and the plate or a description before they leave the terminal, so they are not asked to trust a stranger in a car park.

The driver confirms the destination and the hotel name before moving. A guest going to a sister property is a different journey with a different drop-off. Record the hand-over: time, guest name, vehicle and driver. That record is what the front desk reads when someone calls to ask where the guest is.

The hand-over is also the first chance to hear what the guest needs, such as a late meal or a room that is not ready. That goes to the desk, not to the driver, and the desk can act on it with the room-ready message for a waiting guest. Decide the small things before the car park: water, a child seat, a charging cable, and who pays for parking.

ChecklistThe hand-over, step by step

  • Name confirmed against the sign
  • Bags counted and the number said out loud
  • Guest walked to the vehicle
  • Vehicle type and plate described before the guest leaves the terminal
  • Destination and hotel name confirmed by the driver
  • Guest seated with seat belt before the car moves
  • Hand-over time, driver and vehicle recorded
  • Any guest request passed to the front desk

What should the arrival message to the guest say?

One message before landing that names the person waiting, the sign, the exact place to stand and a number to call, and one short message once the guest is in the vehicle.

Send it while the guest still has a connection, at the origin airport or the layover, not while the aircraft is taxiing. Keep the order fixed: who is waiting and their role, what the sign says, exactly where to stand, what to do if they cannot find it, and the number to call. Write it in plain words with no internal codes; a flight number and a name are useful to the guest, a transfer reference is not.

Send one accurate message rather than a thread of corrections. If the flight changes, replace the message instead of adding to it. Write in the language the booking was made in, and keep the spelling on the sign identical to the spelling in the message. The second message after the hand-over says who the guest is with and what happens next; the drive time is the hotel's own estimate, not a promise.

Keep the message in the same channel as the booking confirmation, where the guest already looks for the hotel. If your hotel runs the hotel's own guest app, that channel is a natural home for it, alongside offers the guest can accept before arrival. For guests arriving on their own, the same four facts fit into giving directions to the hotel in one message.

Key pointThe four facts every arrival message carries

Who is waiting, what the sign says, where exactly to stand, and what to do if the guest cannot find it.

What happens when the guest does not appear?

The hotel applies a rule it wrote before the flight: a waiting limit, one call, one message, a fresh look at the arrivals board, and a written note of what was done.

The waiting limit is the hotel's own decision; it goes into the transfer terms and into the message the guest receives before flying, so nobody negotiates it in the hall. Before anyone leaves, the person at the sign checks the arrivals board again, calls the guest once, sends one message, and tells the front desk.

A late flight follows the same rule: the driver waits, returns to the hotel, or comes back at the new time, and the guest is told which of the three applies. If the guest took a taxi instead, the hotel records it, cancels the vehicle, and does not invent a charge at the door. Whether a wasted trip is charged, and how, belongs in the hotel's own transfer terms agreed before the booking; the hotel confirms that wording with its own adviser. The no-show record is the raw material for the next arrival: which flight, which hall, which message went unanswered.

NoteA rule is procedure, not negotiation

A no-show rule decided in the arrivals hall is a negotiation. The same rule written into the transfer terms and repeated in the arrival message is a procedure.

What to do next

Write the rule once, then use it four times: the sign, the wait point, the hand-over and the message are the same four facts told to four different people. Start with the record in the reservation, because everything else is printed from it, and treat the next delayed flight as the test of whether the rule survives contact with a real arrivals hall. If you want the record, the messages and the guest's own channel to live in one system rather than across three phones, a hotel operating system is where that record belongs. If you are traveling rather than receiving guests, you can also find a hotel in Türkiye (opens in a new tab) for your own arrival.

Frequently asked questions

Should the driver wait inside the terminal or outside at the curb?

Inside, at a named point, wherever the airport allows it, because the guest is looking for a person and not a car. Where the airport restricts who may wait inside, the arrival message gives the door number and a description of the vehicle. The hotel confirms with the airport operator what its staff may do and where.

What should the hotel do if the flight is delayed by several hours?

The flight number makes the delay visible before the driver leaves, so the departure moves with the aircraft. The hotel's written rule then decides whether the driver waits at the airport, returns to the hotel, or comes back at the new time, and the guest is told which one applies. Any charge for a changed trip follows the terms agreed at booking.

Who meets the guest, the driver or a hotel host?

One person does both where the hotel can arrange it, because a hand-over between two staff members in front of the guest is a chance to lose a bag. Where the roles are separate, the host holds the sign, walks the guest to the vehicle and stays until the guest is seated. Either way the hand-over is recorded by name, vehicle and time.

How should the arrival message be worded for a guest who does not read English?

In the language the booking was made in, with the same spelling that appears on the sign. If the guest's name uses characters a printer may drop, the message says what the sign will actually read. The four facts stay the same in any language: who is waiting, what the sign says, where to stand, and what to do if the guest cannot find it.

AI Otel EditorialEditorial team

Drafted with AI assistance from AI Otel’s published fact base. Not yet reviewed by an editor.

For hotels: OtelCiro.

OtelCiro, AI Otel’s hotel growth and consultancy arm, is operating today.

Talk to OtelCiroRequest a briefing